83
2. Instrument cluster
2
Instrument cluster
CAMRY_U (OM33C34U)
● Average fuel economy*
1, 2
/Tank average fuel economy*
1
/Trip aver-
age fuel economy
*
1
Displays the average fuel consumption since the function was
reset, the vehicle was refueled, and the engine was started, respec-
tively
Use the displayed average fuel consumption as a reference.
● Current fuel economy*
1
Displays the current rate of fuel consumption
● Distance to empty
*
1
/Trip distance*
1
/Distance*
1, 2
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining, the distance driven after the engine
was started and the distance since the function was reset, respec-
tively.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
● Trip elapse time*
1
/Elapse time*
1, 2
Displays the engine was started and the elapsed time since the
function was reset, respectively
● Trip average speed
*
1
/Average speed*
1, 2
Displays the engine was started and the average vehicle speed
since the function was reset, respectively
● Digital speedometer
*
1
● Tire inflation pressure*
3
→P. 4 04
*
1
: Can be registered to Drive information 1 through 3. (→P. 84)
*
2
: Resetting procedures:
• Select a function to be reset using the meter control switch and then
press and hold to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to those functions.
*
3
: Vehicles with a tire inflation pressure display function
Drive information
To Next Page
Loading...
Need help?
General
