148
2−4. Using other driving systems
Active traction control system (if equipped)
When the active traction control system is operating
If all wheels spin, the slip indica−
tor flashes to indicate that the
active traction control system
have been engaged.
The active traction control system automatically helps prevent the
spinning of 4 wheels when the veh icle is started or accelerated on
slippery road surfaces.
System operation
Vehicles with an automatic transmission:
Shift the front−wheel drive control lever into L4.
Vehicles with a manual transmission:
Shift the four−wheel drive control lever into LL.
Press the A−TRAC switch to
activate the system.
At this time, the active traction
control system indicator will
come on.
To cancel the system, push the
switch again.
To Next Page
Loading...
Need help?
General
