Need help?Do you have a question about the Toyota GR Supra 2021 and is the answer not in the manual?
General| Brand | Toyota |
|---|---|
| Model | GR Supra 2021 |
| Category | Automobile |
| Language | English |
Details the layout and controls of the vehicle's instrument panel.
Explains the functions of various buttons and switches on the steering wheel.
Details the layout and controls of the vehicle's center console.
Illustrates and describes the components and displays of the instrument cluster.
Explains the meaning of various dashboard indicators and warning lights.
Describes the operation of the keyless entry and locking functions.
Explains how to use the smart key system for vehicle access and operation.
Details the standby state of the vehicle and its functions.
Explains how to open and close the vehicle's hood.
Describes how to adjust the instrument panel lighting brightness.
Explains how to open the fuel filler flap and handle the fuel cap.
Identifies key components located within the engine compartment.
Details the functions and operation of the Toyota Supra Command system.
Explains how to turn the control display on and off manually or automatically.
Describes how to operate the controller with and without navigation system.
Details the functions of various buttons located on the controller.
Explains how to activate and use the parking sensor system.
Describes automatic and manual methods for turning the parking sensors on and off.
Explains how to operate the automatic transmission, including modes and parking.
Details how to engage the parking position in the automatic transmission.
Describes how to engage and operate the manual mode of the transmission.
Explains how to use the paddle shifters for manual gear selection.
Describes temporary engagement of manual mode using paddle shifters.
Explains permanent engagement of manual mode via paddle shifters.
Details how to engage and release the electric parking brake.
Explains the automatic operation of the vehicle's power windows.
Describes how to deactivate the automatic engine start/stop function.
Explains normal and sport modes, including customization settings.
Details how to customize sport mode settings via Toyota Supra Command.
Explains how to deactivate Vehicle Stability Control and Traction mode.
Provides instructions and precautions for using the launch control system.
Explains the operation of the door locks and central locking system.
Details how to set, adjust, and use the cruise control system.
Explains the functions of buttons on the steering wheel for cruise control.
Describes how to set and change speeds using the cruise control system.
Explains how to adjust the steering wheel for optimal driving position.
Explains how to use DRCC for adaptive speed and distance control.
Details the buttons on the steering wheel for operating DRCC.
Describes how to set speed and adjust distance for DRCC.
Explains the operation of headlights, parking lights, and turn signals.
Describes the location and functions of the light switch element.
Explains how to operate high beams and use the headlight flasher function.
Details how to use the right and left turn signals.
Explains how to adjust the seats electrically for driver comfort.
Details the various electrical adjustments available for the seats.
Explains wiper operation, speed settings, and rain sensor sensitivity.
Describes how to adjust the sensitivity of the automatic rain sensor.
Explains how to switch off wipers and perform a brief wipe.
Explains the HUD system, its display information, and control via Supra Command.
Lists the types of information that can be displayed on the HUD.
Provides guidelines for washing and maintaining matte paint finishes.
Explains operation of climate controls, temperature, and fan settings.
Describes how automatic climate control adjusts settings for comfort.
Explains how to turn seat heaters on and off for different temperature levels.
Details controls for entertainment source, volume, and radio/media.
Explains how to set the vehicle's clock and time via Supra Command.
Provides information on the 12V power outlet and its load capacity.
Details the USB media port, its type, and its uses for charging and data.
Explains how to use the wireless charger and LED status indicators.
Describes the meaning of the blue, orange, and red LED status lights.
Explains rearview camera operation, automatic and manual activation.
Describes when the rearview camera automatically activates.
Explains how to control the rearview camera using the Supra Command system.
Introduces various driving stability control systems and their functions.
Explains how ABS prevents wheel lock-up during braking for increased safety.
Details how Brake Assist provides maximum braking force during emergency stops.
Explains how Adaptive Brake Assist enhances brake response in critical situations.
Describes the system that supports driving off on uphill grades.
Explains how VSC maintains a steady course by reducing engine speed and braking.
Describes Traction Mode for optimizing forward momentum in specific conditions.
Explains how the active differential locks the rear axle for optimal power transfer.
Introduces Supra Safety, a driver assistance system for collision mitigation.
Shows the location of the Supra Safety system on/off switch.
Explains automatic and manual methods for switching Supra Safety systems on/off.
Helps mitigate or prevent accidents involving vehicles, pedestrians, and cyclists.
Details additional features like forward radar sensor and DRCC.
Enhances PCS and DRCC capabilities for braking intervention at higher speeds.
Explains how to set the warning time for Supra Safety systems.
Describes warnings and braking actions for detected vehicles or pedestrians.
Details the system's detection potential and limitations for vehicles and pedestrians.
Alerts when the vehicle drifts out of its lane and provides steering intervention.
Explains the warning symbol and green indicator for lane departure detection.
Describes automatic and manual methods for switching the system on and off.
Explains how to set the warning time for Lane Departure Warning.
Details how to adjust the force of steering wheel vibration for LDW.
Explains how to switch steering intervention for LDW on and off.
Automatically switches high beams on/off based on traffic and ambient lighting.
Explains how to activate the AHB system using the light switch and turn signal lever.
Detects vehicles in blind spots and adjacent lanes, issuing warnings.
Describes automatic and manual methods for switching the blind spot monitor.
Explains how to set the warning time for the blind spot monitor.
Details how to adjust steering wheel vibration force for blind spot monitoring.
Provides guidance on proper seat belt use and the Automatic Locking Retractor.
Monitors tire inflation pressure and warns of low pressure with an indicator.
Explains how to display current tire pressure status using Supra Command.
Details how to change TPM settings like tire type and road speed.
Provides steps and precautions for correctly installing floor mats.
Guides through pairing a device using the vehicle's Communication menu.
Guides through pairing a device using the Connected Services menu.
Explains how to search for the vehicle's Bluetooth name on a mobile device.
Describes matching the passkey on the mobile handset and head unit for pairing.
Explains granting access permission for contacts and call history.
Automatically establishes an emergency call and transfers incident data.
Allows remote control of vehicle functions via the Supra Connect app or website.
Includes Battery Guard and roadside assistance request features.
Assists in recovering a stolen vehicle by providing location data to police.
Lists built-in online apps like Weather, News, Google POIs, and Wiki Local.
Offers 24-7 access to a live agent for information and navigation guidance.
Explains seamless iPhone connectivity with wireless CarPlay and charging.
Guides through downloading and enrolling in the Toyota Supra Connect mobile app.
Explains email activation and logging into the Toyota Supra Connect app.
Guides through adding a vehicle using USB connection or manual VIN entry.
Explains confirmation steps like OK, Continue, security code entry, and success.
To Next Page