Toyota Hiace - 3-5. Opening, Closing the Windows; Power Windows

259
3
3-5. Opening, closing the windows
Before driving
3-5.Opening, closing the windows
The power windows can be opened
and closed using the switches.
Operating the switch moves the
front side windows as follows:
1 Closing
2 One-touch closing
*
3 Opening
4 One-touch opening
*
*
: To stop the front side window part-
way, operate the switch in the oppo-
site direction.
■ The power windows can be oper-
ated when
The engine switch is in ON.
■ Operating the power windows after
turning the engine off
The power windows can be operated for
approximately 45 seconds even after
the engine switch is turned to ACC or
OFF. They cannot, however, be oper-
ated once either front door is opened.
■ Jam protection function
If an object becomes jammed between
the front side window and the window
frame while the front side window is
closing, front side window movement is
stopped and the front side window is
opened slightly.
■ Catch protection function
If an object becomes caught between
the door and front side window while the
front side window is opening, front side
window movement is stopped.
■ When the power window cannot be
opened or closed
When the jam protection function or
catch protection function operates
unusually and the front side window
cannot be opened and closed, perform
the following operations with the power
window switch of that door.
● Stop the vehicle. With the engine
switch in ON, within 4 seconds of the
jam protection function or catch pro-
tection function activating, continu-
ously operate the power window
switch in the one-touch closing direc-
tion or one-touch opening direction so
that the front side window can be
opened and closed.
● If the front side window cannot be
opened and closed even when per-
forming the above operations, perform
the following procedure for function
initialization.
1 Turn the engine switch to ON.
2 Pull and hold the power window
switch in the one-touch closing
direction and completely close the
front side window.
3 Release the power window switch
for a moment, resume pulling the
switch in the one-touch closing
direction, and hold it there for
approximately 6 seconds or more.
4 Press and hold the power window
switch in the one-touch opening
direction. After the front side window
is completely opened, continue hold-
ing the switch for an additional 1
second or more.
5 Release the power window switch
for a moment, resume pushing the
switch in the one-touch opening
Power windows
Opening and closing the
power windows