157
2-1. Driving procedures
2
When driving
PRIUS C_AE
Turn signal lever
■ Turn signals can be operated when
The “POWER” switch is in ON mode.
■ If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
The turn signal lever can be used to show the following intentions
of the driver:
Left turn
Right turn
Lane change to the left
(push and hold the lever
partway)
The left hand signals will flash
until you release the lever.
Lane change to the right
(push and hold the lever
partway)
The right hand signals will
flash until you release the
lever.
To Next Page
Loading...
