163
2-2. Instrument cluster
2
When driving
PRIUS C_AE
■ Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
*
1
: The light turns on when the “POWER” switch is turned to ON mode
to indicate that a system check is being performed. It will turn off
after the hybrid system is on, or after a few seconds. There may be
a malfunction in a system if a light does not come on, or if the light
does not turn off. Have the vehicle inspected by your Toyota dealer.
*
2
: The light flashes to indicate that the system is operating.
Turn signal indicator
(→P. 157)
Shift position indicator
(→P. 154)
Headlight high beam
indicator (→P. 182)
“ECO MODE” indicator
(→P. 155)
Tail light indicator
(→P. 182)
EV drive indicator lamp
(→P. 172)
Front fog light indicator
(→P. 185)
Cruise control indicator
(→P. 192)
Immobilizer system
indicator (→P. 88)
Cruise control set indi-
cator (→P. 192)
Driving ready indicator
(→P. 143)
*
1,2
Slip indicator (→P. 197)
EV drive mode indica-
tor (→P. 151)
To Next Page
Loading...
