434
RAV4_OM_OM42A78U_(U)
5-3. Using the audio system (Entune Audio)
To turn auto connection mode on, set “Bluetooth* Power” to on.
(P. 438)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
When you register a phone, auto connection will be activated. Always
set it to this mode and leave the Bluetooth
®
phone in a place where a
connection can be established.
When the engine switch is turned to the “ACC” or “ON” position (vehicles
without a smart key system) or ACCESSORY or IGNITION ON mode
(vehicles with a smart key system), the system will search for a nearby cel-
lular phone you have registered.
Next, the system automatically connects with the most recent of the
phones connected to in the past. Then, the connection result is displayed.
When auto connection has failed or “Bluetooth* Power” is turned off,
you must connect the Bluetooth
®
device manually.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Follow the steps in “Connecting a Bluetooth
®
device” from .
(P. 433)
Registering an additional device
Select “Select Device” on the Bluetooth
®
audio control screen.
For more information: P. 43 1
Selecting a registered device
Select “Select Device” on the Bluetooth
®
audio control screen.
For more information: P. 43 3
Auto connection
Manual connection
Connecting a Bluetooth
®
audio player
1
1
2
1
2
To Next Page
Loading...
