EasyManua.ls Logo

Toyota RAV 4 2015 - Using the Voice Command System; Voice Command System

Toyota RAV 4 2015
732 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
483
RAV4_OM_OM42A78U_(U)
5-3. Using the audio system (Entune Audio)
5
Interior features
Voice command system
Press the talk switch.
To cancel the voice command sys-
tem, press and hold the talk switch.
After a beep sounds, say the desired command.
On the list screen, you can select the desired command.
Microphone
P. 443
When using the microphone
It is unnecessary to speak directly into the microphone when giving a com-
mand.
Voice commands may not be recognized if:
They are spoken too quickly.
They are spoken at a low or high volume.
The roof or windows are open.
Passengers are talking while voice commands are spoken.
The air conditioning speed is set high.
The air conditioning vents are turned towards the microphone.
In the following conditions, the system may not recognize the command
properly and using voice commands may not be possible:
The command is incorrect or unclear. Note that certain words, accents or
speech patterns may be difficult for the system to recognize.
There is excessive background noise, such as wind noise.
The voice command system enables the hands-free system to
be operated using voice commands.
Using the voice command system
1
2
Information Provided by:

Table of Contents

Related product manuals