154
If you cannot shift the selector lever
out of "P" position to other positions
even though the brake pedal is de-
pressed, use the shift lock override but-
ton as follows:
1. Turn the motor key to "LOCK" posi-
tion. Make sure the parking brake is
set.
2. Pry up the cover with a flat−bladed
screwdriver or equivalent.
3. Insert the screwdriver or equivalent
into the hole to push down the shift
lock override button. You can shift
out of "P" position only while push-
ing the button.
4. Shift into "N" position.
5. Insert the cover.
6. Start the traction motor. For your
safety, keep the brake pedal de-
pressed.
Be sure to have the system checked by
your EV service station as soon as pos-
sible.
If you lose your keys
You can purchase a new key at your EV
service station if you can give them the
key number.
See the suggestion given in "Keys" in
Section 2−1.
If your keys are locked in the vehicle and
you cannot get a duplicate, many EV ser-
vice stations can still open the door for
you, using their special tools. If you must
break a window to get in, we suggest
breaking the quarter window because it is
the least expensive to replace. Be ex-
tremely cautious to avoid cuts from the
glass.
If you cannot shift running
mode selector lever
To Next Page
Loading...
