Toyota RAV4 2022 - Disabling Sway Warning Alert; Adjusting Sway Alert Sensitivity

51
ADJUSTING SWAY ALERT SENSITIVITY
DISABLING SWAY WARNING ALERT
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press “
” switches and select “Sway Sensitivity” and then press “ ” to
change the desired setting.
(4) Press “
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
Refer to the Toyota Owner’s Manual for additional information on the LTA system
operation, settings adjustments, limitations, and precautions before attempting to
use it.
(1) Press “
” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ LTA” and then press and hold “ .” The
setting screen is displayed.
(3) Press “
” switches and select “Sway Warning” and then press “ ” to
change the desired setting.
(4) Press “
” to go back to the menu.