15
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
1. When the liftgate reaches the desired height, push the rear liftgate close-button
POUIFEPPSKBNPGUIFMJGUHBUFPODF1SFTTBOEIPMEUIFCVUUPOVOUJMUIFCV[[FS
TPVOETUJNFT
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button until the buzzer sounds 4 times, and continue to hold
until it buzzes again -then let go. Push the same button to close the liftgate.
When you next open the liftgate, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press “
” or “ ” meter
control switches and select “
” from the MID. Press “ ” or “ ” and select
and then press “ ”. Select Opening Adjustment, then press “ ”. Select
EFTJSFEQPTJUJPOIFJHIUPQUJPOTUPDIPPTFGSPNUIFOQSFTTi
”.
For more details, refer to the Owner’s Manual.
To automatically open/close Power Liftgate Quickly swipe your foot near the
lower center part of the rear bumper for within 1 second to trigger sensor. To
operate, make sure that the touchless sensor operation is enabled and that you are
carrying the remote.
Rear door-Power Liftgate (if equipped)
Instrument panel
Power Liftgate (back door)
Hands-Free, Foot-Activated Power Liftgate
(if equipped)
Open: Push and hold
Close: Push and hold again
(close only)
Sensor area
(open only)
Carry Smart
Key remote
PROGRAMMABLE POWER LIFTGATE
To Next Page
Loading...
