Toyota RAV4 Hybrid 2020 - Road Sign Assist (RSA)

49
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
Road Sign Assist (RSA)
Road Sign Assist is designed to help ensure drivers are kept informed. The RSA
system recognizes specific road signs using a forward-facing intelligent camera to
QSPWJEFJOGPSNBUJPOUPUIFESJWFSWJBB.VMUJJOGPSNBUJPO%JTQMBZ.*%*GUIFTZTUFN
judges that the vehicle is being driven over the speed limit, or performing actions
prohibited by other support types of road signs, it alerts the driver using a warning
display and may sound a warning buzzer.
RSA DISPLAY
SUPPORTED TYPES OF ROAD SIGNS
SETTING RSA
When the driving support system
information is selected, a maximum of
3 signs can be displayed.
Speed limit Stop
Do Not Enter Yield
When a tab other than the driving
support system information is selected,
only a recognized speed limit sign or
EPOPUFOUFSTJHOXIFOOPUJGJDBUJPOJT
OFDFTTBSZXJMMCFEJTQMBZFE
1SFTT“
” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ RSA” and then press “ .”
1SFTT“
” switches and select the “Road Sign Assist on/off” setting function
and then press “
.”
1SFTT“
” to go back to the menu.
Note: If the engine switch was last turned off while a speed limit sign was
displayed on the multi-information display, the same sign displays again when
the engine switch is turned back ON.
Refer to the Toyota Owner’s Manual for additional information on RSA operation,
settings adjustments, limitations, and precautions before attempting to use it.