Toyota RAV4 Hybrid 2020 - Blind Spot Monitor with Rear Cross Traffic Alert (BSM W;Rcta); Rear View Monitor System

31
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
The Blind Spot Monitor is a system that has two functions:
t5IF#MJOE4QPU.POJUPSGVODUJPOBTTJTUTUIFESJWFSJONBLJOHUIFEFDJTJPOXIFOUP
DIBOHFMBOFT
t5IF3FBS$SPTT5SBGGJD"MFSUGVODUJPOBTTJTUTUIFESJWFSXIFOCBDLJOHVQ
The system is designed to use radar sensors to detect vehicles traveling in the
Rav4 HV’s blind spot. If a vehicle is detected, the driver will be alerted via the
outside rear view side mirror indicators.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the
vehicle is detected, the outside rear view mirror indicators flash.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
Rear view monitor system
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display”. Select “Camera” to adjust the screen contrast and brightness.
Refer to the Owner‘s Manual for limitations and more details on this system.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
(if equipped)
Buzzer (RCTA only)
System ON/OFF
Indicators
Monitor screen
display (RCTA
function only)
Indicator
Indicator