Toyota RAV4 Hybrid 2020 - Page 39

37
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
CHANGING PRE-COLLISION ALERT TIMING
%*4"#-*/(13&$0--*4*0/4:45&.1$4
Each time the PCS switch is pressed, the response to the PCS alert timing changes.
Far
Middle
(default)
Near
1SFTT“ ” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ PCS” and then press “ ”. The setting
screen is displayed.
1SFTT“
” switches and select “Sensitivity” and then press “ ” to select
the desired setting. Each time it is pressed, the response to the PCS alert timing
changes as shown above.
1ress “
” to go back to the menu.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
1SFTT“
” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ PCS” and then press “ ”.
1SFTT“
” and select “PCS” and then press “ ” to select the desired setting.
1SFTT“
” to go back to the menu.
Note: The system is enabled each time the power switch is turned to ON mode.
Refer to the Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.