40
ADJUSTING LDA ALERT SENSITIVITY
DISABLING STEERING ASSIST
TOYOTA SAFETY SENSE
™
SWAY WARNING SYSTEM
1SFTT“ ” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ LDA” and then press “ .”
1SFTT“
” switches and select the “Steering Assist” setting function and then
press “
.”
1SFTT“
” to go back to the menu.
Note: Operation of the LDA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.
5IFESJWFSDBOBEKVTUUIFTFOTJUJWJUZPGUIF-%"XBSOJOHGVODUJPOGSPNUIF
.VMUJ*OGPSNBUJPO%JTQMBZ.*%DVTUPNJ[BUJPOTDSFFO
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1SFTT“
” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ LDA” and then press “ .”
1SFTT“
” switches and select the “Sensitivity” setting function and then
press “
.”
1SFTT“
” to go back to the menu.
SWS is a function of LDA and is designed to detect swaying based on the vehicle
location in the lane and the driver’s steering wheel operation. To help prevent
swaying, the system alerts the driver using a buzzer sound and a warning displays
in the MID.
Continuous lane deviations from
swaying.
Gentle swaying from driver’s
inattentiveness.
Acute steering wheel operation after the
number of operations decrease due to driver’s
inattentiveness.