43
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
-"/&53"$*/("44*45$0/5*/6&%
The LTA function EJTQMBZTXIFOUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%JTTXJUDIFEUP
the driving assist system information screen.
5IFTZTUFNEJTQMBZTTPMJEXIJUFMJOFTPOUIF-5"JOEJDBUPSXIFOWJTJCMFMBOF
markers on the road are detected. A side flashes orange to alert the driver when the
vehicle deviates from its lane.
5IFTZTUFNEJTQMBZTPVUMJOFTPOUIF-5"JOEJDBUPSXIFOMBOFNBSLFSTPOUIFSPBE
are not detected or the function is temporarily cancelled.
Note: When operation conditions are no longer met, a function may be
temporarily canceled. However, when the operation conditions are met again,
operation of the function is automatically restored. For example, LTA may not
function on the side(s) where white/yellow lines are not detectable.
Refer to the Toyota Owner’s Manual for additional information on LTA operation,
settings adjustments, limitations, and precautions before attempting to use it.
ADJUSTING LTA ALERT SENSITIVITY
DISABLING STEERING ASSIST
5IFESJWFSDBOBEKVTUUIFTFOTJUJWJUZPGUIF-5"XBSOJOHGVODUJPOGSPNUIF
.VMUJ*OGPSNBUJPO%JTQMBZ.*%DVTUPNJ[BUJPOTDSFFO
High - Is designed to warn approximately before the front
tire crosses the lane marker.
Normal - Is designed to warn approximately when the front
tire crosses the lane marker.
1SFTT“
” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ LTA” and then press “ .”
1SFTT“
” switches and select the “Sensitivity” setting function and then
press “
.”
1SFTT“
” to go back to the menu.
1SFTT“
” switches and select “ ”GSPNUIF.VMUJ*OGPSNBUJPO%JTQMBZ.*%
1SFTT“
” switches and select “ LTA” and then press “ .”
1SFTT“
” switches and select the “Steering Assist” setting function and then
press “
.”
1SFTT“
” to go back to the menu.
Note: Operation of the LTA system and setting adjustments continues in the
same condition regardless of Ignition cycle until changed by the driver or the
system is reset.