198
5-4. How to charge
Each type of information related to charging is displayed on the multi-
information display.
■ Time until charging is complete
Turning the power switch to ON
mode while the battery is being
charged, an estimated time for
the completion of charging can
be checked.
After the estimated time is
checked, turn off the power
switch to turn the display off.
■
Charging messages
The first time the power switch
is turned to ON mode after
charging is completed, a mes-
sage detailing the results of the
charging will be displayed.
Also, if an operation which can-
not be carried out is attempted
during charging, a warning
message will be displayed.
If a message appears, perform
the operation required by the
message. (P. 355)
If charging fails to finish suc-
cessfully, a message will remain
on the multi-information display.
To change the display, turn the
“DISP” knob.
Displays shown on the multi-information display
To Next Page
Loading...
