301
7-3. Do-it-yourself maintenance
7
Maintenance and care
Checking and replacing fuses
Turn the power switch off and confirm that the charging connector
has not been connected.
After a system failure, see “Fuse layout and amperage ratings” for
details about which fuse to check. (P. 305)
Open the fuse box cover.
Motor compartment (type A fuse box)
Push the tab in and lift the lid
off.
If any of the electrical components do not operate, a fuse may
have blown. If this happens, check and replace the fuses as nec-
essary.
1
2
3
To Next Page
Loading...
