204
5-4. How to charge
Press and hold the charging
timer switch.
Once set, the time display will
change from flashing to on.
Turn the power switch off. (P. 166)
The indicator for the charging timer switch changes from on to flashing.
Connect the charging cable to the vehicle. (P. 181)
Check that the charging indicator (P. 84) has come on. It will turn off after
several seconds.
If the indicator does not come on, re-insert the charging connector. If it still
does not come on, check the power source status using the power indica-
tor on the CCID (Charging Circuit Interrupting Device).
■
Canceling the charging timer function
If the charging timer switch is
pressed while the switch indica-
tor is on or flashing, the charg-
ing timer function will be
canceled. However, if the
charging cable has already
been connected to the vehicle,
charging will commence imme-
diately.
After the schedule is canceled,
the charging timer switch indica-
tor will turn off.
Automatic cancelation of the
charging timer function.
(P. 208)
5
6
7
To Next Page
Loading...
