35
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
DISABLING PRE-COLLISION SYSTEM (PCS)
(1) Press “ ” or “ ” of meter control switches and select .
(2) Press “
” or “ ” of meter control switches and select “PCS”, and press .
(3) Press “
” or “ ” of meter control switches and select “PCS”, and press to
select the desired setting (on/off).
Note: The system is enabled each time the power switch is turned to ON mode.
Refer to a Toyota Owner’s Manual for additional information on PCS operation,
settings adjustments, limitations, and precautions before attempting to use it.
Lane Departure Alert (LDA)
TURNING ON THE LDA SYSTEM
Press the LDA switch to turn the LDA system on. Depress again to turn it off.
Note: The system will continue in the last state it was in (ON or OFF) when the
engine is started again.
Refer to the Owner‘s Manual for limitations and more details on this system before
attempting to use it.
The Lane Departure Alert system recognizes visible white or yellow lane markers via
a camera sensor under certain circumstances. The system alerts the driver with a
warning buzzer sound and message in the Multi-Information Display (MID) when it
detects the vehicle deviating from or swaying multiple times within its lane.
49195b_MY19_Sequoia_QRG_V1_ML_0718.indd 35 7/31/18 10:05 PM
To Next Page
Loading...
