56
3. OTHER SETTINGS
■TRANSFERRING IMAGES
1 Open the cover and connect a USB
memory.
Turn on the power of the USB memory if it
is not turned on.
2 Press the “APPS” button.
3 Select “Setup”.
4 Select “General”.
5 Select “Customize Startup Image” or
“Customize Screen Off Image”.
6 Select “Transfer”.
7 Select “Yes”.
CUSTOMIZING THE STARTUP
AND SCREEN OFF IMAGES
An image can be copied from a USB
memory and used as the startup and
screen off images.
When the engine switch is in the “ACC”
or “ON” position, the initial screen will
be displayed. (P.30)
When “Screen Off” on the “Setup”
screen is selected, the screen is turned
off and the desired screen off image
that is set is displayed. (To turn the
screen off: P.20)
● When saving the images to a USB,
name the folder that the startup image is
saved to “StartupImage” and name the
folder that the screen off image is saved
to “DisplayOffImage”. If these folder
names are not used, the system cannot
download the images. (The folder
names are case sensitive.)
● The compatible file extensions are JPG
and JPEG.
● An image’s file name, including file
extension, can be up to 32 characters.
● Image files of 5 MB or less can be trans-
ferred.
● Up to 3 images can be downloaded.
To Next Page
Loading...
Need help?
General
