Do you have a question about the Toyotomi Oil Miser 23 and is the answer not in the manual?
Steps to prepare the heater for its first use or after a shutdown.
How to operate the heater directly under user control for heat output.
Procedure to start the heater and the initial preheating process.
How to set and maintain the desired room temperature using buttons.
Mode to reduce ignition frequency and conserve electricity.
How to program the heater for specific times and temperatures.
Instructions for setting two distinct timed temperature adjustments within 24 hours.
How to manually select High, Medium, or Low burn modes for testing.
Steps to safely turn off the heater and allow it to cool down.
Instructions for cleaning the heater's louvers with a damp cloth.
How to remove and vacuum clean the mesh air filter.
Regular inspection of fuel lines and joints for any signs of leakage.
Verifying the flue pipe connection is firm and clearing dust.
Procedure for cleaning the fuel sump strainer monthly and seasonally.
Guidance on professional inspection and service for optimal performance.
Explanation of the automatic daily cleaning cycle for the igniter.
Lists symptoms that are normal during heater start-up or operation.
Identifies error codes and their corresponding causes and solutions.
Recommended steps for storing the heater when not in use.
Safety measures to prevent fuel leakage during heater transport.
Lists the tools required for installing the heater and flue pipe.
Identifies the standard parts provided with the heater for installation.
Lists available optional parts for extending installation capabilities or features.
Essential safety guidelines to follow during the heater installation process.
Detailed instructions for mounting the heater and connecting the flue pipe.
Steps for connecting the heater to a permanent electrical power source.
Overview of available fuel tank configurations for the heater.
Guidelines for correctly installing an external fuel tank and its lines.
Instructions on how to install the oil guides for fuel piping.