TOZO NC9 Plus User Manual

Contents [ hide
1 Operation of earbuds
2 Documents /
Downloads
2.1 Related Manuals
Operation of earbuds
How to pair
1. Open the charging case, they will power on automatically and will connect to each other automatically within 10
seconds.
2. The two earbuds flash red and blue alternately. (Pairing Mode)
3. Search for the pairing name [TOZO-NC9 Plus] and select it.
Another method of turning one & Turing off
Turn on: Tap and hold the Touch Control on both earbuds for over 3 seconds. Turnoff: 1. Touch the Control button 5 seconds
will turn off when earbuds are in playless status. 2. The earbuds will turn off automatically after it is disconnected for more
than 5 minutes. (Normal mode)
Reset
If you accidentally get only one earbud work or fails to pair each other, please reset it 1. Delete all TOZO.NC9 Plus records
on the phone, then turn off the Bluetooth. 2. Holding both earbuds button for 5 seconds till red lights on to turn off earbuds. 3.
Holding the MFB Touch Panel on each of earbuds for another 5 seconds till the blue light turn on and off, and then clicking
the MFB Touch Panel on each of the earbuds twice quickly, the reset process will be done when the Purple light on for 1s,
then two earbuds flash red and blue alternately.
NOTE: In case there is [Connection Unsuccessful ] in your devices, please consider deleting all historical records of
(TOZO.NC9 Plus) and try the pairing process again.
Switch between noise-control modes
Click the left earbud to switch the ANC Noise Cancellation/Transparency mode. The ANC function is not available when using
single earphones.

TOZO NC9 Plus Specifications

General

Brand	TOZO
Model	NC9 Plus
Category	Wireless Headphones
Language	English