1. Pick up two headsets from charging case, and they will power and pair to each other
automatically within 10 seconds.
2. The indicators will flash to red and blue light alternatively. (In pairing mode)
3. Selecting the [TOZO-T12] from device list in your Bluetooth manual.
Reset
Please consider to reset your earbuds to factory setting if any abnormal connectivity issues occures by
below steps:
1. Pick up two earbuds from charging case, then holding both earbuds button for 5 seconds till red
lights on to turn off earbuds.
2. Pressing the MFB Touch Pannel on each of earbuds for another 5 seconds till red and blue light
blinking simultaneously, and then clicking the MFB Touch Pannel on each of earbuds twice
quickly, the reset process will be done when the purple light blinking.
NOTE:
In case there is any unsuccessful message in your devices, please consider to delete historial records
of [TOZO-T12] and try the paring process again.