13
Option 2: Stick to a clean wall
1. Attach the included adhesive to the back of the metal plate properly.
Note: The adhesive is for one-time use. Avoid re-using the adhesive to ensure its adhesion.
2. Wipe o the dust from the surface, stick the metal plate with the adhesive to the clean wall, and press it down for 15 seconds to ensure the plate is
rmly attached. Then attach the camera to the plate.
Note: This is applicable with tile, glass, marble, metal, stainless steel, and hard wall surfaces. Sticking to other surfaces may result in damage from falling o.
3M
3M
Strong Magnet. Crushing Hazard.
CAUTION
3M Adhesive
To Next Page
Loading...
