Need help?Do you have a question about the TP-Link Tapo C210 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Certification | FCC, IC, CE, NCC |
| Placement supported | Indoor |
| Connectivity technology | Wireless |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Form factor | Dome |
| Mounting type | Ceiling/Desk |
| Product color | White |
| LED indicators | System |
| Sensor type | - |
| Number of sensors | 1 |
| Optical sensor size | 1/2.9 \ |
| Fixed focal length | 4 mm |
| Total megapixels | 3 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| AC input voltage | 100 - 240 V |
| DC output current | 0.6 A |
| DC output voltage | 9 |
| Power consumption | 300 mA |
| Power source type | AC, DC |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 9.144 m |
| Audio system | 2-way |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Security algorithms | WPA, WPA2-PSK |
| Harmonized System (HS) code | 85258900 |
| Pan range | 0 - 360 ° |
| Tilt angle range | 0 - 114 ° |
| Angle of rotation | 360 ° |
Weight and Dimensions| Depth | 85 mm |
|---|---|
| Width | 86.6 mm |
| Height | 117.7 mm |
| Package depth | 180 mm |
| Package width | 150 mm |
| Package height | 110 mm |
| Package weight | 430 g |
Explains symbols and formatting used in the guide.
Provides links to product specifications, support, and setup videos.
Details the meaning of different LED color and blinking patterns.
Identifies key components like lens, microphone, speaker, ports, and buttons.
Guide to obtaining the Tapo mobile application from app stores.
Instructions for signing into an existing or new TP-Link account.
Process of adding the camera device within the Tapo application.
Steps for configuring the camera via the Tapo app.
Instructions on how to position and physically install the camera.
Explains the Amazon FFS feature for easy device setup.
Describes the LED status lights during the FFS process.
Steps 1 & 2 for enabling the Tapo skill in Amazon Alexa.
Steps 3 & 4 for linking accounts and authorizing access.
Step 5 for completing the FFS setup.
Navigating the main screen of the Tapo app and viewing cameras.
Explains the live video feed screen and its interactive features.
Accessing and modifying various camera configurations.
Overview of account management, FAQs, and other app sections.
How to remotely control camera movement and set cruise paths.
Navigating to the section for configuring motion detection.
Activating motion detection and receiving alerts.
Configuring alarm types, sounds, and schedules.
Setting specific areas within the camera's view for motion detection.
Fine-tuning the sensitivity for motion detection.
Scheduling when motion detection recordings should occur.
How to access and review recorded motion events.
Navigating to camera settings to enable recording features.
Activating 24/7 recording using the microSD card.
How to access and review continuous video footage.
How to activate privacy mode to temporarily disable streaming and recording.
Information on CE marking compliance and operating frequency.
Statement of compliance with relevant EU directives.
Details on radio frequency exposure limits and compliance.
Statement of compliance with Canadian regulations.
Statement regarding IC radiation exposure limits.
Regulatory notices for Taiwan (NCC) and Taiwan (BSMI).
Explanation of EAC marking and general safety precautions.
Explanation of symbols found on the product label.
To Next Page
