TP-Link Tapo C210 - Set Up Your Camera; Configure Camera Settings; Place and Mount the Camera

5
Step 4. Congure Camera
Follow app instructions to configure your
camera and add it to your home network.
Step 5. Place Camera
Place your camera on a at surface, or install it on a wall or ceiling with the provided
mounting template and screws.
Note:
Make sure you
ax the camera base using screws before securing the camera.
1. Mark Position
Place the mounting template where you want
the camera.
For wall mounting, drill two holes through two
circles.
2. Mount Base
Ax the camera base using the screws.
For wall mounting, insert two anchors into the
holes and use the screws to ax the camera
base over the anchors.
3. Secure Camera
Attach the camera on the base and rotate to
secure the camera.
Unit: mm