Need help?Do you have a question about the TP-Link Tapo C520WS and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Auto-tracking | Yes |
| Certification | CE, FCC, RoHS, RCM |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wireless |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 512 GB |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Channel bandwidth | 2400 MHz |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Supported network protocols | TCP/IP, ICMP, DNS, HTTPS, TCP, UDP |
| Total megapixels | 4 MP |
| Maximum resolution | 2560 x 1440 pixels |
| Video formats supported | H.264 |
| Supported graphics resolutions | 2560 x 1440 |
| LED type | IR |
| Infra-red wavelength | 850 nm |
| Night vision distance | 30 m |
| Number of cameras | 1 |
| Fixed focal length | 3.18 mm |
| Maximum aperture number | 1.61 |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -30 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| AC input voltage | 100 - 240 V |
| DC output current | 0.85 A |
| DC output voltage | 9 |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 7.65 W |
| Power consumption (typical) | 3.75 W |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | Black, White |
| International Protection (IP) code | IP66 |
| Security algorithms | 128-bit AES, WPA-PSK, WPA2-PSK |
Weight and Dimensions| Depth | 123 mm |
|---|---|
| Width | 123.8 mm |
| Height | 90 mm |
Explains the text formatting conventions used in the guide.
Provides links for product specifications and technical support.
Identifies and describes the main external parts of the camera.
Details the reset button and microSD card slot for camera operation.
Describes the speaker, Ethernet port, and DC power connector functions.
Instructions for downloading the necessary Tapo mobile application.
Guides users through logging into their TP-Link account and adding the camera.
Explains the Amazon Frustration-Free Setup feature for easier device connection.
Details the LED status indicators during the Amazon FFS setup process.
Step-by-step instructions for inserting a microSD card into the camera for recording.
Instructions for mounting the camera on a wall using provided hardware.
Instructions for installing the waterproof seal on power connectors for outdoor use.
Step-by-step guide on using the reset button to restore the camera to factory settings.
Details the FCC compliance statement and relevant information for the device.
Outlines Canadian compliance, radiation exposure, Industry Canada, and Korea warnings.
Covers CE mark warning, EU Declaration of Conformity, and RF exposure info.
Details the UKCA mark and UK Declaration of Conformity.
To Next Page
