Need help?Do you have a question about the TP-Link TAPO C120 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Day/night mode | Yes |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired & Wireless |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 512 GB |
| Form factor | - |
| Mounting type | Ceiling/Wall/Desk |
| Product color | White, Black |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.9 \ |
| AC input voltage | 100 - 240 V |
| DC output current | 1 A |
| DC output voltage | 5 |
| Power source type | DC |
| AC input frequency | 50 / 60 Hz |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -20 - 45 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Fixed focal length | 3.17 mm |
| Maximum aperture number | 1.65 |
| Field of view (FOV) angle | 120 ° |
| Infra-red wavelength | 940 nm |
| Night vision distance | 10 m |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Networking standards | IEEE 802.11n, IEEE 802.11b, IEEE 802.11g |
| Security algorithms | WPA, WPA2-PSK |
| Audio system | 2-way |
| Signal-to-Noise Ratio (SNR) | 96 dB |
| Total megapixels | 4 MP |
| Maximum resolution | 2560 x 1440 pixels |
| Video formats supported | H.264 |
Weight and Dimensions| Depth | 57.4 mm |
|---|---|
| Width | 67.4 mm |
| Height | 44.1 mm |
Explains symbols like blue text and underlines used in the guide.
Provides links for specifications and technical support.
Labels components on the front, back, and side views of the camera.
Explains how to insert and initialize a microSD card.
Instructions on how to reset the camera to factory default settings.
Instructions on how to adjust the camera's viewing angle.
Explains the meaning of different LED states for setup and operation.
Instructions on positioning the camera's adjustable stand for setup.
Note advising to peel off the protective film before use.
Instructions for downloading the Tapo app from app stores or QR code.
Process for logging into the Tapo app with a TP-Link ID.
Steps to add the camera model within the Tapo app.
Explains the purpose and benefits of Amazon FFS for Tapo devices.
Details LED status indicators during the Amazon FFS process.
Instructions for placing the camera on a flat surface.
Instructions for magnetically mounting the camera to metal surfaces.
Instructions for mounting the camera to a wall using adhesive.
Instructions for wall mounting using screws and anchors.
Guidance on securely connecting the power connector to the camera.
Instructions on securing the power cord using tape or clamps.
Provides regulatory compliance details for the device and its power supply.
Details compliance with EU RF exposure requirements for public exposure.
States compliance with UK Radio Equipment Regulations.
Lists important safety guidelines for using the device and its accessories.
Explains the meaning of various symbols found on the product and power supply labels.
To Next Page