5
Charge the Battery
The battery comes partially charged. We recommend that you fully charge the battery before use. This will take about ve and a half hours with the
included charger.
5V 2A USB Charger
Note:
1. Peel o lm from the camera before use.
2. Warning: Do not tear o the silicone part by force as it may aect the waterproof performance.
3. When you plug in the USB charger, the LED should blink amber quickly for 3 seconds. If not, make sure the power is running and check your connection.
4. Charge the battery using the USB cable and charger included in the package. Inappropriate cables may result in slow charging or failure to charge.
5. Keep the ports rmly covered when not in use to ensure waterproof performance.
6. Check the battery status in the Tapo app after setup.
To Next Page
Loading...
