106
NTP Server I / NTP
Server II
IP Address for the NTP Server.
Manually
Figure 9-12 Get Automatically From the Internet
If the AC cannot access the Internet, you should set the system time manually.
Current Time Displays the current system time.
Set Time Specify the way the time is set (get automatically from the internet or manually).
Date Specify the time zone of the device.
Time IP Address for the NTP Server.
Synchronize with PC‘s
Clock
Click this button, and the system time of the device will be matched with the
current time on the host PC.
Note:
AC500 has a built-in RTC (Real-time Clock) chip, the system time won't be restored to the default time setting
when the AC is rebooted or powered off. AC50 doesn't have an RTC chip. Please set the time manually or
connect to the internet to set the time after the device is rebooted or powered o.
To Next Page
Loading...
