Need help?Do you have a question about the TP-Link Omada OC200 and is the answer not in the manual?
General| Networking standards | IEEE 802.3af, IEEE 802.3at |
|---|---|
| Ethernet LAN data rates | 10, 100 Mbit/s |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Input current | 1 A |
| DC input voltage | 5 V |
| Power over Ethernet (PoE) | Yes |
| Power consumption (typical) | 5 W |
| Flash memory | 4000 MB |
| Internal memory | 1024 MB |
| Processor frequency | 1000 MHz |
| Control display unit | No |
| Internal memory type | DDR3 |
| Management platform | L3 |
| Security algorithms | SSID, WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| Cables included | LAN (RJ-45) |
| Compatible operating systems | Windows10, 8, 7, Vista, XP; MAC OS; NetWare, UNIX; Linux |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package depth | 128 mm |
| Package width | 135 mm |
| Package height | 70 mm |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 99.8 mm |
| Height | 25 mm |
Explains how to choose between Controller Mode and Standalone Mode for managing EAPs.
Illustrates the physical connections required to set up EAPs in a local network.
Details the process of accessing the EAP interface and securing the wireless network by changing the default SSID.
Explains how to set up SSIDs, security, and advanced wireless radio settings.
Explains how to configure dynamic or static IP addresses for the EAP.
Guides on creating and managing the EAP's administrative user account.
Explains how to enable EAP discovery by Omada controllers.
Provides instructions on rebooting the EAP and resetting it to factory defaults.
Explains how to save and load EAP configuration settings.
Guides users on downloading and installing firmware updates for the EAP.
To Next Page
