63
3.1 Monitor the EAP
To monitor the EAP information, go to the Status > Device page.
The following device information is displayed:
Device Name Displays the name of the EAP. The name consists of the product model
followed with the MAC address of the EAP by default.
Device Model Displays the product model of the EAP.
Firmware Version Displays the current firmware version the EAP. To update the firmware,
you can refer to
5.6 Update the Firmware
.
Hardware Version Displays the hardware version the EAP.
MAC Address Displays the MAC address of the EAP.
IP Address Displays the IP address of the EAP.
Subnet Mask Displays the subnet mask of the EAP.
System Time Displays the current system time. To configure the system time, you can
refer to
5.3 Configure the System Time
.
Uptime Displays how long the EAP has been working since it starts up.
To Next Page
Loading...
