TP-Link Omada OC200 - Connect Network Devices

6
1.2 Connect Network Devices
To connect your EAPs to the local network, refer to the following topology.
In
ternet
Clients
Router (DHCP Server)
WANLAN
EAP
EAP
1. Connect the WAN port (or Internet port) of the router to the internet.
2. Connect your EAPs to the LAN port of the router.
3. Connect your wireless clients such as phones, tablets and laptops to the WiFi of the
EAP. The default SSID is printed at the bottom of the EAP.
Now you can surf the internet on your phones, tablets and laptops. If you cannot access
the internet, follow the FAQ to troubleshoot the problem.