TP-Link AC500 - Page 66

62
SSID Specify the SSID that will be enabled with Remote Portal authentication.
Note: The SSIDs labeled "Bound" are being used by other authentication
entries. If these SSIDs are selected, the original configuration will be replaced
by the current configuration.
Remote Portal Address Enter the address of the server used for remote portal authentication.
Authenticaiton Server
Type
Select the server type used for remote portal authentication.
Success Redirect URL Specify the redirect URL address after successful authentication.
Fail redirect URL Specify the redirect URL address after the authentication failure.
Non-sense
Authentication
If non-sense authentication is enabled, the non-sense authenticated users will
pass the authentication automatically when connecting to the wireless network.
Description Specify a description for the remote portal authentication entry to make it
easier to search for and manage.
Note:
When Local Authentication Server is selected, you need to add the login information of the allowed clients. For
detailed conguration, refer to
7.3 Local User Management
.

Remote Authentication Sever
Select Remote Authentication Server as the Authentication Server Type, and the following
page will appear.
Note:
To congure the remote Radius server ,