76
Chapter 13
Customize Your Network Settings
3. Keep the default values or set a new SSID and password, and click SAVE . This SSID
and password will be applied for the 2.4GHz and 5GHz wireless networks.
• To change the security option:
1. Go to Advanced > Wireless > Wireless Settings.
2. Select an option from the Security drop-down list.
• No security - No password is needed to access your guest network.
• WPA/WPA2-Personal or WPA/WPA2-Enterprise - Select this option to enable
the standard authentication method. It’s recommended to keep the Version and
Encryption as default values and set a password for the wireless network.
• WPA2/WPA3-Personal - Select this option to enjoy stronger protections than
WPA/WPA2-Personal. For the Version:
• Auto - It is recommended to select Auto, which allows for gradual migration to a
WPA3-Personal network while maintaining interoperability with WPA2-Personal
devices and without disruption to users.
• WPA3-SAE - It provides stronger protections for the network, but only allows
clients supporting WPA3 to access the wireless network.
In addition
• Transmit Power - Select either High, Middle or Low to specify the data transmit power.
The default and recommended setting is High.
• Channel Width - Select a channel width (bandwidth) for the wireless network.
• Channel - Select an operating channel for the wireless network. It is recommended
to leave the channel to Auto, if you are not experiencing the intermittent wireless
connection issue.
To Next Page
Loading...
