EasyManuals Logo

TP-Link Archer AX55 Quick Installation Guide

TP-Link Archer AX55
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Power on the modem, and then wait
about 2 minutes for it to restart.
2
Choose your device type
Router
Range Extender
Archer AX6000
Set Up the Network
1. Connect your device to the router wirelessly
or with an Ethernet cable.
New Password:
Let’s Get Started
Conrm Password:
http://tplinkwi.net
Method TWO: Via a Web Browser
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q1 of
Need Help? in this guide.
Set up with videos:
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#wi--routers
Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether
Tether
or
2. Open the Tether app and log in with your
TP-Link ID.
3. Tap the button in the Tether app and
select Router > Wireless Router. Follow
the steps to complete the setup and
connect to the internet.
Note: If you don’t have an account, create one first.
The default wireless network names (SSIDs) and password
are printed on the label at the bottom of the router.
Model: Archer AX3000
AX3000 Gigabit Wi-Fi Router
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
2
Connect the power adapter to
the router and turn on the router.
3
Connect the Hardware
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more
than 2 seconds. Both the LEDs should turn solid on.
Power
On
Internet
On
2.4GHz
On
5GHz
On
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /
Cable / Satellite modem, connect the Ethernet cable to the router’s WAN port, and then follow steps 3
and 4 to complete the hardware connection.
*Image may dier from actual product.
Unplug the power to turn o your modem, if any, and remove
the backup battery if it has one.
Place the router horizontally and orient the antennas vertically.
Modem
Unplug the power
Verify that the hardware connection is correct by checking the following LEDs.
4
1
Internet
1
Connect the powered-off
modem to the router’s WAN
port with an Ethernet cable.

Other manuals for TP-Link Archer AX55

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Archer AX55 and is the answer not in the manual?

TP-Link Archer AX55 Specifications

General IconGeneral
DSL WANNo
Ethernet WANYes
WAN connection typeRJ-45
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standardWi-Fi 6 (802.11ax)
WLAN data transfer rate (max)2976 Mbit/s
WLAN data transfer rate (first band)574 Mbit/s
WLAN data transfer rate (second band)2402 Mbit/s
VPN serverOpenVPN, PPTP
Cabling technology10/100/1000Base-T(X)
Ethernet LAN data rates1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Number of guest networks (5 GHz)1
Ethernet LAN (RJ-45) ports4
Security algorithmsWPA, WPA-Enterprise, WPA2, WPA2-Enterprise, WPA3
Supported network protocolsIPv4, IPv6
Product typeTabletop router
Product colorBlack
Internal memory512 MB
Processor cores2
Output current2 A
Output voltage12 V
Power source typeAC
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Browser supportedInternet Explorer 11+, Firefox 12.0+, Chrome 20.0+, Safari 4.0+
Cables includedLAN (RJ-45)
Package depth240 mm
Package width330 mm
Package height73 mm
Package weight940 g
Number of products included1 pc(s)
Sustainability certificatesRoHS, Federal Communications Commission (FCC), CE
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth134.5 mm
Width261.1 mm
Height41 mm

Related product manuals