50
Chapter 9
Network Security
1 ) Select Blacklist and click Save.
2 ) Select the device(s) to be blocked in the Online Devices table by ticking the
checkbox(es).
3 ) Click Block above the Online Devices table. The selected devices will be added
to Devices in Blacklist automatically.
To allow specific device(s):
1 ) Select Whitelist and click Save.
2 ) Click Add in the Devices in Whitelist section. Enter the Device Name and MAC
Address (You can copy and paste the information from the Online Devices list if
the device is connected to your network).
3 ) Click OK.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Blacklist or Whitelist.
To Next Page
Loading...
