57
Chapter 11
HomeShield
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > HomeShield > Parental Controls.
3. Click
to create a profile for a family member.
4. Add basic profile information.
1 ) Enter a Name for the profile to make it easier to identify. Set the age to get the
corresponding filter level.
2 ) Click + Add Devices.
3 ) Select the devices that belong to this family member. Access restrictions will be
applied to these devices. Click Add when finished.
Note: Only devices that have previously been connected to your router’s network are listed here. If you are unable
to find the device you want to add, connect it to your network and then try again.
4 ) Click NEXT
5. Block content for this profile.
To Next Page
Loading...
