112
Chapter 16
Customize Your Network Settings
*Image may differ from your actual product.
Company’s server
PC
Router B
Router A
Switch
LAN: 192.168.0.1
192.168.0.100
LAN: 192.168.0.2
WAN: 172.30.30.100
172.30.30.1
How can I do that?
1. Change the routers’ LAN IP addresses to two different IP addresses on the same
subnet. Disable Router B’s DHCP function.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
Router A.
2. Go to Advanced > Network > Routing.
3. Click Add and finish the settings according to the following explanations:
To Next Page
Loading...
