34
Chapter 7
Wireless Settings
1. Go to Wireless or Advanced > Wireless > Wireless Settings.
2. Select Hide SSID, and your SSID won’t display when you scan for local wireless
networks on your wireless device and you need to manually join the network.
• To change the security option:
1. Go to Advanced > Wireless > Wireless Settings.
2. Select an option from the Security drop-down list. We recommend you don’t change
the default settings unless necessary.
• To change channel settings:
1. Go to Advanced > Wireless > Wireless Settings.
2. Select Advanced Settings of any wireless band.
3. Select a Channel Width (bandwidth) for the wireless network. It is recommended to
just leave it as default.
4. Select an operating Channel for the wireless network. It is recommended to leave
the channel to Auto if you are not experiencing the intermittent wireless connection
issue.
For the 6 GHz network, you can select the Enable PSC checkbox. When PSC (Preferred
Scanning Channel) is enabled, only channels with higher connectivity will be reserved
to ensure 6 GHz device connections.
• To change the transmission mode:
1. Go to Advanced > Wireless > Wireless Settings.
2. For the 2.4 GHz and 5 GHz networks, disable Smart Connect, then select a transmission
Mode according to your wireless client devices. It is recommended to just leave it as
default.
For the Mode of the 6 GHz network, please keep the default settings.
To Next Page
Loading...
