Need help?Do you have a question about the TP-Link ARCHER C1200 and is the answer not in the manual?
General| Color | black |
|---|---|
| Wi-Fi Mesh System | no |
| Band Technology | dual |
| Frequency Band | 2.4 ghz, 5.0 ghz |
| Ethernet Standard | 10/100/1000 |
| Ethernet Switch | yes |
| Wireless Standard | ac, n |
| Gigabit Ethernet Speed | yes |
| Antennas | 3 |
| Parental Control | yes |
| Firewall | none |
| Data Encryption | yes |
| Encryption Type | wpa, wpa2, wpa-psk, wpa2-psk |
| Ports | rj-45, usb |
| LAN Ports | 4 |
| WAN Ports | 1 |
| Bluetooth | no |
| Smart Applications | no |
Weight and Dimensions| Height | 6.3 inches |
|---|---|
| Width | 9.6 inches |
| Net Weight | 2.4 pounds |
Provides guidelines on where to place the router for optimal performance and safety, avoiding moisture, heat, and interference.
Details the step-by-step process for connecting the router to the modem and power, and connecting devices.
Guides users through an automated process for setting up the router's internet connection.
Explains how to manually configure internet connection settings based on ISP information (Dynamic IP, Static IP, PPPoE, etc.).
Details the configuration steps for establishing an IPv6 internet connection using various protocols.
Explains how to enable QoS and allocate bandwidth priority to devices or applications.
Details how to configure DoS Protection and SPI Firewall to guard against cyber threats.
Guides on blocking or allowing specific devices to access the network using Blacklist or Whitelist.
Explains how to bind IP addresses to MAC addresses to prevent ARP spoofing and attacks.
Guides on setting up an OpenVPN server on the router for secure remote access to the home network.
Procedures for performing online or manual firmware upgrades for the router.
How to back up current settings, restore from a backup, or reset the router to factory defaults.
Steps to change the password used for accessing the router's web management page.
To Next Page
