TP-Link Archer C2 - Page 104

Archer C2 AC750 Wireless Dual Band Gigabit Router
- 94 -
Figure 4-82 Add or Modify an Access Target Entry
I) In Description field, create a unique description for the target (e.g. Target_1).
II) In IP Address field, enter the IP address of the target.
III) Specify the Target Port manually.
2） If you select MAC Address, the screen shown is Figure 4-82.
Figure 4-83 Add or Modify an Access Target Entry
I) In Description field, create a unique description for the target (e.g. Target_1).
II) In IP Address field, enter the IP address of the target.
III) Specify the Target Port manually.
3） If you select URL Address, the screen shown is Figure 4-84.