Archer C2 AC750 Wireless Dual Band Gigabit Router
- 74 -
Offline - Indicates the print service feature is disabled. You can click "Start" button to start the
print service.
4.11 NAT
Choose “NAT”, and you can enable or disable the NAT and Hardware NAT Control feature. The
NAT Rules and Hardware NAT will work properly only when the NAT Control feature is enabled.
Figure 4-60 The Forwarding menu
Enable NAT Control - If enabled, the NAT function and the Forwarding configuration will
take effect.
Disable NAT Control - If disabled, neither NAT function nor Forwarding configuration will
take effect.
Enable Hardware NAT Control - If enabled, the Hardware NAT feature will take effect.
Disable Hardware NAT Control - If disabled, neither Hardware NAT feature will take effect.
4.12 Forwarding
Figure 4-61 The Forwarding menu
There are four submenus under the Forwarding menu (shown in Figure 4-61): V
irtual Servers,
Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the
corresponding function.
To Next Page
Loading...
