TP-Link ARCHER C25 - User Manual

Quick Installation Guide
AC900 Wireless Dual Band Router
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, and follow Step 4 and 5 to
complete the hardware connection.
Verify that the hardware
connection is correct by
checking these LEDs.
5
Power
On
Note: If the 2.4GHz LED and 5GHz
LED are o, please press and hold
the WPS/Wi-Fi On/O button on the
rear panel until they are on.
Connecting the Hardware
2.4GHz
On
5GHz
On
On
Internet
Modem
Power adapter
Power adapter
Internet
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Turn o the modem, and remove
the backup battery if it has one.
1
Turn on the modem, and
then wait about 2 minutes
for it to restart.
3
2
Router
Turn on the router.
4

TP-Link ARCHER C25 Specifications

General

Ethernet Ports	4 x 10/100Mbps LAN Ports
WAN Port	1 x 10/100Mbps WAN Port
Operating Humidity	10%~90% non-condensing
Wireless Standards	IEEE 802.11b/g/n
Frequency Bands	2.4 GHz
Antennas	3 x External Antennas
Wireless Security	WPA/WPA2
Security Features	Access Control
Operating Temperature	0°C ~ 40°C (32°F ~ 104°F)
Power Supply	9V/0.6A