Quick Installation Guide
C3150
AC3150 Wireless MU-MIMO Gigabit Router
Connect the Hardware
If your internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the router’s Internet port, then follow steps 1, 5 and 6 to
complete the hardware connection.
Verify that the following LEDs turn solid before
continuing with the configuration.
6
Note: If the 2.4GHz LED and 5GHz LED are off, please press the
Wi-Fi On/Off button on the side panel for 2 seconds, then both
LEDs should turn stable in a few seconds.
Power adapter
For optimum performance, orient the four
antennas as shown in the drawing below.
30° 30°
1
Install the antennas.
Router
Modem
Power adapter
Turn off the modem, and
remove the backup battery
if it has one.
2
3
Connect the modem to the
Internet port on your router
with an Ethernet cable.
Turn on the modem, and
then wait about 2 minutes
for it to restart.
4
Internet
Power
On
On
Internet
5GHz
On
2.4GHz
On
Connect the power
adapter to the router
and turn on the router.
5
To Next Page
Need help?
General
Weight and Dimensions
