TP-Link Archer D9 Quick Installation Guide

Quick
Installation Guide
Open a web browser on the computer and configure the modem router according to the following main clues.
Via Web BrowserMethod 1
2. Configuring the Modem Router
1. Connecting the Hardware
7106505166 REV1.0.2
AC1900 Wireless Dual Band Gigabit
ADSL2+ Modem Router
Note: If you don’t need the phone service, just directly connect the ADSL port to the Phone Jack with a phone cable.
Note: Please wait for 1-2 minutes until the ADSL LED is on.
Enter http://tplinkmodem.net or 192.168.1.1 in
the address bar. Type in admin for both the user
name and password and click OK.
Note: If the login window does not appear, please refer to
FAQ->Q1.
Enter the parameters provided by your ISP and then
click Next. Here we take PPPoE as an example.
a
C
fed
Select Yes to auto detect your connection type and then click
Next to continue.
b
Choose Quick Setup in the main menu and then click
Next to start the configuration. Select your Region and
Time Zone from the drop-down list, and then click Next.
Click Next to continue.
Wireless Network Name:
Password:
TP-LINK_XXGHz_XXXXXX
XXXXXXXX
Quick Setup-Wireless 2.4GHz & 5GHz
Back Next
Channel:
Mode:
Security:
Note: You may rename your 2.4GHz/ 5GHz wireless network name and create
your own password.
Back Next
XXXXXX
XXXXXX
XXXXXX
Quick Setup-PPPoE
DSL PVC:
Auto-detection has succeeded!
8/35
Encapsulation Mode:
LLC
Connection Type:
PPPoE
Username:
Password:
Confirm Password:
Click Save and wait for your settings to take effect. Click
Finish to complete the setup.
Finish
Quick Setup-Complete
Operation Mode Configuring: Success
WAN Connection Configuring: Success
Gateway and DNS Configuring: Success
Wireless Configuring: Success
Time Zone Configuring: Success
Region
Back
Next
Quick Setup-Region and Time Zone
XXXXXX
XXXXXXXXXX
Time Zone
Back
Next
Quick Setup-Auto Detection
Yes.
No. I want to configure the Internet connection myself.
Auto-Detect Connection Type:
Enjoy!
Now your wired and
wireless devices can
connect to the Internet !
Connect the splitter, computer and power adapter as follows. Then turn on the modem router.
Check the following LED lights to ensure
the hardware connection is correct.
12
Power
On
On
ADSL
On
LAN
Splitter
Phone Jack
USB 3.0
ADSL
POWER
POWER
ON/OFF
WPS
WiFi
ON/OFF
LAN1
LAN2
LAN3
LAN4/WAN
Wired
Connect your computer to the modem router (Wired or Wireless).
Or
Wireless
1
Ethernet cable
Connect wirelessly by using
the default network name
(SSID) and password on the
product label printed on the
bottom of the modem
router.
USB 3.0
POWER
POWER
ON/OFF
LAN1
LAN2
LAN3
LAN4/WAN
Model:Archer D9 ver:1.0
S/No.:XXXXXXXXXXXXX
MAC:XXXXXXXXXXXX
Wireless Password /PIN
2
Login
http://tplinkmodem.net
admin
admin

TP-Link Archer D9 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
USB version	3.2 Gen 1 (3.1 Gen 1)
Input current	3 A
Rack mounting	No
Frequency range	2.4 - 5 GHz
Bandwidth (first)	5 GHz
Bandwidth (second)	2.4 GHz
Filtering description	Wireless MAC
WLAN data transfer rates supported	600, 1300 Mbit/s
Ethernet LAN (RJ-45) ports	4
DHCP server	-
Antennas quantity	3
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK
Product color	White
Output voltage	12 V
Power source type	AC, DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Certification	CE, FCC, RCM, RoHS
Cables included	LAN (RJ-45), Phone (RJ-11)

Weight and Dimensions

Depth	86 mm
Width	221 mm
Height	168.5 mm
Weight	- g