AC1300 High Power
Wireless Dual Band USB Adapter
7106506350 REV1.0.0
Quick
Installation
Guide
MODEL NO. Archer T4UHP
Connect to a Computer
1 2
Install Driver and Utility
Insert the CD.
Browse the CD, go to Archer T4UHP > Mac
OS X Driver, unzip the Mac OS X version.zip
file and run the Installer.
3
Join a Wireless Network
For Mac OS X
uninstall.commandInstaller.pkg
SHELL
Follow the wizard to complete the installation.
b.
a.
c.
Note: You can also download the driver and
utility at www.tp-link.com.
Option 1: Via TP-LINK Utility Option 2: Via Wi-Fi Protected Setup (WPS)
a. Click (TP-LINK Wireless Configuration
Utility) on the menu bar.
b. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.
a. Press the WPS button on your router.
b. In 2 minutes, press and hold the WPS button on
the adapter until the WPS progress screen appears.
c. When you are prompted “WPS Protocol Finished!”,
click OK.
Fri 5:14 PM
TP-LINK_TEST_Device
TP-LINK_0001
TP-LINK_0969
TP-LINK_XXXX
Join Other Network
WPS
Open Wireless Utility
USB-WiFi: On
Turn USB-WiFi Off
Connect the adapter to a USB port on your
computer using the USB cable provided.
To Next Page
Need help?
General
