Need help?Do you have a question about the TP-Link Archer TX50E V1 and is the answer not in the manual?
General| Wi-Fi Technology | Wi-Fi 6 |
|---|---|
| Maximum Speed | 2402 Mbps (5 GHz), 574 Mbps (2.4 GHz) |
| Bluetooth Version | 5.0 |
| Interface | PCIe |
| Operating System Compatibility | Windows 10 (64-bit) |
| Bluetooth Standards | Bluetooth 5.0 |
| Frequency | 2.4 GHz, 5 GHz |
| Bands | Dual-band (2.4 GHz, 5 GHz) |
| Antenna | 2 external antennas |
| Wireless Standards | IEEE 802.11a/b/g/n/ac/ax |
| Dimensions | 95.2 x 120.8 x 21.5 mm (3.75 x 4.75 x 0.85 in) |
| Wireless Security | WPA3 |
Turn off your computer, unplug the power cable, and remove the case panel.
Connect the provided USB cable to the adapter.
Locate an available PCIE X1 slot and carefully insert the adapter.
Locate an available F_USB connector and carefully plug the USB cable into it.
Connect antennas, replace case panel, plug in power, and turn on.
Insert the CD and run Autorun.exe to install drivers.
Follow onscreen instructions to complete Wi-Fi and Bluetooth driver installation.
Click the network icon, select your Wi-Fi network, and enter the password.
Right-click the Bluetooth icon, select 'Add a Bluetooth Device', and follow prompts.
Keep device away from water, fire, humidity, hot environments, and do not disassemble or modify.
Do not use the device in locations where wireless devices are prohibited.
Read and follow safety information for proper operation and to avoid accidents.
To Next Page