Do you have a question about the TP-Link Archer TX20U and is the answer not in the manual?
Interface | WLAN |
---|---|
USB version | 3.2 Gen 1 (3.1 Gen 1) |
Connectivity technology | Wired |
USB connector form factor | Straight |
Windows operating systems supported | Windows 10, Windows 11 |
Quick installation guide | Yes |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 90 % |
Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
Security algorithms | WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPA3 |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Maximum data transfer rate | 1201 Mbit/s |
WLAN data transfer rates supported | 11, 54, 300, 400, 574, 867 Mbit/s |
Internal | No |
Component for | PC |
Product color | Black |
LED indicators | Status |
Operating modes | Infrastructure mode |
Transmitting power (CE) | 18.5 - 21.5 dBm |
Transmitting power (FCC) | 19 dBm |
Depth | 29.2 mm |
---|---|
Width | 90.2 mm |
Height | 12.9 mm |
Overview of the adapter's features and capabilities, including Wi-Fi 6, dual-band, coverage, and USB 3.0.
Explanation of the adapter's LED indicators for status, such as driver installation and detection.
Instructions for installing the adapter's driver software via USB port and setup executable.
Steps to connect the adapter to a wireless network using the computer's built-in utility.
Procedure for removing the adapter's driver software from the system.
Solutions and checks if the adapter is not recognized by the computer.
Steps to confirm successful driver installation using the Device Manager.
Troubleshooting steps for connectivity problems after driver installation.
Guidance on how to locate the adapter's hardware version number.